Installing Your Washer - Samsung WF457ARG Series User Manual

Installing your washer

INSTALLING YOUR WASHER
Before STEP 5 is complete, do not plug the power cord into a wall socket.
CAUTION
Packaging materials can be dangerous to children; keep all packaging material (plastic bags,
polystyrene, etc.) well out of the reach of children.
WARNING
STEP 1
Selecting a location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or fl ooring that may obstruct ventilation Is
Is away from direct sunlight
•
away from direct sunlight
• Has adequate ventilation
• Is not exposed to freezing temperatures (temperatures are never below 32 °F or 0 °C)
• Is away from heat sources such as oil or gas
• Has enough space so that the washer doesn't stand on its power cord
STEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove all
shipping bolts from the back of the unit.
1. Loosen all the bolts with the supplied wrench.
2. Hold the shipping bolt with your hand and pull it through
1. Hold the shipping bolt with your hand and pull it through
the wide section of the hole. Repeat for each shipping bolt.
the wide section of the hole. Repeat for each shipping bolt.
3. Fill the holes with the supplied bolt hole covers.
2. Fill the holes with the supplied bolt hole covers.
4. Store the shipping bolts in a safe location where they can
3. Store the shipping bolts in a safe location where they can
be easily retrieved in the event that you have to move the
be easily retrieved in the event that you have to move the
washing machine in the future.
washing machine in the future.
20_ Installing your washer
WF457ARG-03153A_EN.indd 20 WF457ARG-03153A_EN.indd 20
ventilation
2012-03-09 2012-03-09 4:09:26 4:09:26