Table of Contents
Advertisement
3. HOW TO ASSEMBLE
a) Handle Assembly Tool required: Phillips screwdriver.
slide the handle piece and back piece into the slots in the back of the unit. Insert the
screws into the holes as indicated, and tighten with a Phillips screwdriver. (fig 3/1)
fig 3/1
slide the back piece into the slots in the lower base. Insert the screws into the two
holes just above the lower cord hook, and tighten with a Philiips screwdriver. (fig 3/1.1)
b) Tool Storage
To attach tools:
(a) Clip the dust brush into the holster at the side of the cleaner with the bristles
facing out.
(b) Insert the crevice tool and extension wand into the slots on the side of the
cleaner. (fig 3/2.1)
(c) Clip air powered pet tool onto the front of the cleaner. (fig 3/2.2)
fig 3/2
fig 3/1.1
fig 3/2.1
fig 3/2.2
5
Advertisement
Table of Contents
