Installing A Drive - Akai MPC4000 Service Manual

6. Use a metal rod or similar object as a prop inside the chassis to hold up the top panel.
The side panels and screws you removed must be kept in a safe place.
To close the top panel, re-tighten the screws in the opposite order to which they were removed.

Installing a drive

1. If you are installing a removable-media drive such as a CD-ROM drive or Zip drive, remove the blank panel from the
front panel.
2. Use the hard disk attachment screws (included with the MPC4000) to attach the drive to the bracket, and attach the
bracket to the bottom panel of the chassis. Use the bracket in the correct direction (as illustrated or on reverse side)
according to the drive mounted.
When installing a drive in the 3.5 inch bay
Bracket (S)
PC IO AD_DA
P7
P8
PC IO
PC CPU
SERVICE MANUAL
29