Installation; Unpacking And Removing The Transit Bolts - Haier BYWR1206 User Manual

o Remove any debris that is in the area of the appliance that you
removed the drain pump filter from.
o Screw the filter clockwise back into position, making sure that it
is fully tightened. You should keep turning until you cannot turn
it any further.
o IMPORTANT:
appliance has stuck on a cycle, until the water inside of
the machine has cooled sufficiently. Otherwise the water
that comes out of the drain pump filter may still be hot.

Installation

IMPORTANT:
COMPLETED BY A SUITABLY QUALIFIED PERSON. WE
ONLY SANCTION THE INSTALLATION GIVEN IN THIS
INSTRUCTION MANUAL. YOU SHOULD KEEP THE
TRANSIT
TRANSPORT THE MACHINE IN THE FUTURE.
Unpacking the machine and removing the transit bolts
IMPORTANT: The transit bolts MUST be removed before your
washing machine is used for the first time.
Do not perform
THIS
PACKAGING,
o Remove
rinse out the filter under
the tap.
o Remove any debris from
the filter.
this operation
INSTALLATION
IN CASE YOU
o Remove the
from the
appliance.
the filter and
if the
MUST BE
NEED TO
back plate
rear of the
30