Sanyo TLS-4024P Service Manual page 4

E01→ The cylinder motor does not rotate.
E02→ The take-up reel does not rotate.
E03→ The capstan motor does not rotate.
E05→ The loading and unloading cannot be performed with
the cassette inserted.
(The tape guide is caught.)
E06→ Front unloading cannot be performed when ejecting
the cassette.
(Front loading can be performed.)
E07→ Front loading and front unloading cannot be per-
formed when ejecting the cassette.
E08→ The mechanism becomes 1 (BRAKE) while
moving from 2 (STOP), 3 (PLAY), 4 (STILL/
SLOW), and to 5 (REVERSE FRAME ADVANCE).
(The mechanism mode switch contact is faulty.)
E09→ The mechanism becomes 7 (INITIAL) while
moving from1 (BRAKE), 2 (STOP), 3 (PLAY), 4
(STILL/SLOW), and to 5 (REVERSE FRAME
ADVANCE).
(The mechanism mode switch contact is faulty.)
Mechanism Mode Display Contents
Mode. No. Mechanism mode
00 CASSETTE OUT
01 STAND-BY
02
STOP
03
STILL
04 REC-PAUSE
06 FRAME ADVANCE
08
PLAY
Error Codes (Self-Diagnosis Contents)
Mode. No. Mechanism mode
09 REC
12 CUE
13 REVIEW
14 FAST FORWARD
15 REWIND
30 REVERSE PLAY
31 REVERSE FRAME ADVANCE
– 4 –
E10→ The capstan motor does not rotate, or the capstan
motor and the cylinder motor does not rotate with
the cassette inserted.
E11→ The cylinder motor does not rotate with the
cassette inserted.
E12→ The supply reel does tte tape eject when tape
unloading.
E13→ The tape cannot be loaded with the cassette
inserted.
(But unloading can be performed.)
E14→ The tape cannot be loaded normally.
E15→ The mechanism does not move to the correct
position after tape loading.
E16→ Mechanism position "3" cannot be used during
intermittent recording.
Mode. No.
32
33
Mechanism mode
INTERMITTENT REC
REVERSE STILL