GE JCSP38 Owner's Manual page 20

Care and cleaning of the range.
Stop guide
Rail
20
Oven Light Replacement
CAUTION:
Before replacing your
oven light bulb, disconnect the electrical
power to the range at the main fuse or
circuit breaker panel.
Be sure to let the light cover and bulb
cool completely.
To remove the cover:
Twist lens counterclockwise about a
quarter turn to remove.
Do not remove any screws to remove the cover.
Replace bulb with a 40-watt
appliance bulb or two-prong
halogen bulb, as appropriate.
Storage Drawer Removal
To remove the drawer:
Pull the drawer out until it stops.
Lift the front of the drawer until the
stops clear the guides.
Remove the drawer.
To replace the cover:
Line up tabs of lens in front of tabs
on housing and rotate clockwise to
engage.
To replace the drawer:
Place the drawer rails on the guides.
Push the drawer back until it stops.
Lift the front of the drawer and
push back until the stops clear the
guides.
Lower the front of the drawer and
push back until it closes.