Table of Contents
Advertisement
Menu
Using the Menu
Refer to page
24
for how to set up the Menu.
Settings that are assigned to [SCENE1] in [CUSTOMIZE SCENE] by default are indicated with
underlined text.
Camera Setup
≥ Switch to Manual Mode.
MENU
: [CAMERA SETUP] # desired setting
[CUSTOMIZE SCENE]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SCENE6]
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1
Touch [CUSTOMIZE SCENE].
2
Touch the scene file.
≥ The scene file will switch by touching [SCENE1] to [SCENE6].
≥ Touch [EXIT] to exit the menu screen.
3
(To change the setting of the scene file)
Change the setting of the camera setting menu.
≥ Following settings for camera setting menu can be stored.
j [DETAIL LEVEL]
j [V DETAIL LEVEL]
j [DETAIL CORING]
j [CHROMA LEVEL]
j [CHROMA PHASE]
j [COLOR TEMP A ch]
j [COLOR TEMP B ch]
j [MASTER PED]
≥ Changed settings of the camera setting menu are saved in the scene file.
Default setting of the scene file
[SCENE1]
Setting appropriate for standard recording
[SCENE2]
Setting appropriate for recording considering the characteristic of fluorescent
lamps (indoors, etc.)
[SCENE3]
Setting appropriate for recording with modulation in resolution, color shade, and
contrast
[SCENE4]
Setting appropriate for recording with wider gradation in dark area (dusk, etc.)
[SCENE5]
Setting appropriate for recording as a cinema with high contrast
[SCENE6]
Setting appropriate for recording as a cinema with high dynamic range
(l
33)
- 89 -
(l 90
to 93)
j [AUTO IRIS LEVEL]
j [DRS]
j [DRS EFFECT]
j [GAMMA]
j [KNEE]
j [MATRIX]
j [SKIN TONE DTL]
Advertisement
Table of Contents
