Table of Contents
Advertisement
∫ To finely adjust the White Balance
It is possible to adjust the White Balance in increments of 0.1K. A value between P2.4K and P9.9K
can be set.
≥ Switch to Manual Mode.
1
Press the W.B. button to display [VAR].
2
Display operation icons
3
Touch
/
4
Touch
to finish the adjustment.
∫ To set the White Balance in accordance to the recording scene
1
Fill the screen with a white subject or place a white piece of paper in front of
the lens.
2
Press the W.B. button to display Ach.
≥ When the operation icon is displayed and
3
Keep on pressing the W.B. button to start the White Balance adjustment.
≥ The screen goes dark momentarily, "WB SET OK" is displayed, and the adjustment ends.
≥ When the mode of White Balance is set to something other than Ach/Bch, the Black Balance
adjustment is performed by pressing and holding the W.B. button. Setting is completed when the
screen goes black momentarily and "BB SET OK" is displayed.
≥ When the White Balance/Black Balance cannot be performed, an error message "WB SET NG"
or "BB SET NG" is displayed on the screen. In such case, use other mode.
≥ Settings assigned to Ach/Bch can be finely adjusted in [COLOR TEMP A ch]/
[COLOR TEMP B ch].
≥ The contents previously set are maintained in the Ach/Bch. Perform the setting again when the
recording condition has changed.
(l
33)
(l
64), and touch
to adjust the color balance.
(l
91)
.
is touched, it will switch to
Ach
- 41 -
.
(l
64)
Bch
Advertisement
Table of Contents
