Assembly - Craftsman 247.770990 Operator's Manual

Drive Control
Upper Hose
Handle Bracket
Rope Guide
Handle Knobs
Lower Hose
Handle Bracket
Safety Glasses
Bottle of Engine Oil
Operator's Manual
Fresh Start
Upper Handle
Speed Control
Wing Nut
Cable Guide
Carriage
Screws
Lower Handle
Wing Nuts
Bag
Hose

Assembly

Blower Chute
TM
Cartridge
Figure 1
ASSEMBLY
IMPORTANT: This unit is shipped without gasoline or oil in the engine.
Be certain to service engine with gasoline and oil as instructed in the
separate engine manual before operating your machine.
NOTE: Reference to right and left hand side of the Yard Vacuum is
observed from the operating position.
OPENING CARTON
1. Cut each corner of the carton vertically from top to bottom.
2. Remove all loose parts.
3. Remove loose packing material.
REMOVING UNIT FROM CARTON
1. Lift unit from the rear to detach it from underlying carton material
and roll unit out of carton.
2. Check carton thoroughly for any other loose parts.
NOTE: Make sure not to crimp cables while removing loose parts or
the entire unit from the carton.
LOOSE PARTS IN CARTON
(See Figure 1)
a. Upper and Lower Handle
b. Hose Assembly
c. Safety Glasses
d. Engine Oil (May be located in bag)
e. Bag
f. Blower Chute
g. Operator's Manual
h. FreshStart™ Cartridge
6