Motorola AP-7131 Product Reference Manual page 252

6-36 AP-7131 Access Point Product Reference Guide
Use the VPN screen to add and remove VPN tunnels. To configure an existing VPN tunnel, select it
from the list in the
Config field.
To configure a VPN tunnel on the access point:
1. Select Network Configuration
2. Use the
tunnel network address information and display key exchange information for each tunnel.
Add
Del
VPN Tunnels field. The selected tunnel's configuration displays in a
VPN Tunnels field to add or delete a tunnel to the list of available tunnels, list
Click Add
tunnel, select it from the list and use the parameters within the
VPN Tunnel Config
Click Del
confirmation before deleting the tunnel.
-> WAN -> VPN from the access point menu tree.
to add a VPN tunnel to the list. To configure a specific
field to set its properties.
to delete a highlighted VPN tunnel. There is no
VPN Tunnel