JVC LT-32X667 Service Manual page 12

3.1.16 REMOVING THE CONTROL PWB (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the POWER CORD HOLDER.
• Remove the LCD PANEL UNIT.
(1) Remove the 4 screws [A].
(2) Remove the CONTROL PWB COVER.
(3) Remove the CONTROL PWB.
3.1.17 REMOVING THE INVERTER PWB (MASTER) (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the POWER CORD HOLDER.
• Remove the LCD PANEL UNIT.
(1) Remove the 3 screws [B].
(2) Remove the INVERTER PWB COVER.
(3) Remove the INVERTER PWB (MASTER).
INVERTER PWB
COVER
B
INVERTER PWB
(MASTER)
LCD PANEL UNIT
1-12 (No.YA428)
A
CONTROL PWB
COVER
CONTROL PWB
D
HOOK
3.1.18 REMOVING THE INVERTER PWB (SLAVE) (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the POWER CORD HOLDER.
• Remove the LCD PANEL UNIT.
(1) Remove the 3 screws [C].
(2) Remove the INVERTER PWB COVER.
(3) Remove the INVERTER PWB (SLAVE).
3.1.19 REMOVING THE BACKLIGHT UNIT (Fig.3)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the POWER CORD HOLDER.
• Remove the LCD PANEL UNIT.
(1) Remove the 6 screws [D].
(2) Remove the 6 hooks.
(3) Remove the PANEL FRAME.
(4) Remove the LCD PANEL from the BACKLIGHT UNIT.
INVERTER PWB
C
COVER
INVERTER PWB
(SLAVE)
HOOK
HOOK
Fig.3
HOOK
HOOK
HOOK
PANEL FRAME
LCD PANEL
BACK LIGHT UNIT