Handset Locator - Panasonic KX-TG9331 Operating Instructions Manual

3
Wait for the paged party to answer.
• If the paged party does not
answer, press
[~]
to return to
the outside call.
4
To complete the transfer:
Press [OFF].
• The outside call is being routed to
the destination unit.
To establish a conference call:
Press [Conf].
• To leave the conference, press
[OFF]. The other parties can
continue the conversation.
• To put the outside call on hold,
press [HOLD]. To resume the
conference, press [Conf].
• KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344
1
During an outside call, press
[INTERCOM] to put the calion hold.
2
To page a specific handset, enter the
handset number.
To page all handsets, press [0] or
wait for a few seconds.
3
Wait for the paged party to answer.
• If the paged party does not
answer, press [INTERCOM] to
return to the outside call.
4
To complete the transfer:
Press [SP-PHONE].
• The outside call is being routed to
the handset.
To establish a conference call:
Press [CONF].
• To leave the conference, press
[SP-PHONE]. The other 2 parties
can continue the conversation.
• To put the outside call on hold,
press [HOLD]. To resume the
conference, press [CONF].
Intercom/Locator
Answering a transferred call
Press
[~]
to answer the page.
• KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344
Press [SP-PHONE] to answer the
page.
Note for handset and base unit:
• After the paging party disconnects,
you can talk to the outside caller.
Handset locator
You can locate a misplaced handset by
paging it.
1
Base unit:
[LOCATOR]
• All registered handsets beep for 1
minute.
2
To stop paging:
Base unit:
Press [LOCATOR].
Handset:
Press [INTERCOM], then press
[OFF].
Note:
• When the ringer volume for outside
calls is set to off (page 26), the
handset rings at a low level for paging.
For assistance, please visit http://www.panasonic.com/help
43