1: Attaching The Table-Top Stand (Except Xbr-65Hx950) - Sony Bravia XBR-65HX950 Operating Instructions Manual

• Ensure that there are no objects in front
of the TV.
IR Sensor
10
3D Sync
Transmitter
1: Attaching the
Table-Top Stand
(except XBR-65HX950)
Refer to the supplied Table-Top Stand
leaflet for proper attachment.
~
• Do not put stress on the LCD panel or the
frame around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Table-Top Stand.
1
Place the TV set on the Table-Top Stand.
~
• Align the TV from the top, slide it in until
the guide pins cannot be seen.
2
Fix the TV to the Table-Top Stand using
the supplied screws. The arrow marks
indicate the location of the screw
holes used for securing the Table-Top
Stand.
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
Guide
pins