Getting Started; Checking The Accessories; Inserting Batteries Into The Remote; 1: Attaching The Table-Top Stand (Except Kdl-65Hx920) - Sony KDL-65HX920 Operating Instructions Manual

Getting Started

Checking the accessories

Remote (1)
Size AAA batteries (R03 type) (2)
Table-Top Stand (1)*
(except KDL-65HX920)
Fixing screws for Table-Top Stand
(M5 × 16) (3) (except KDL-65HX920,
KDL-60NX720)
Assembling screws for Table-Top Stand
(M6 × 14) (4) (except KDL-65HX920,
KDL-40NX720)
Assembling screws for Table-Top Stand
(M6 × 14) (3) (for KDL-40NX720)
Hexagon wrench (1) (except KDL-65HX920)
Video/Component adapter (1)
(except KDL-65HX920)
Operating Instructions (this manual) and
other documents
1
* Assemble the Table-Top Stand with the supplied
assembling screws. Refer to the supplied Table-Top
Stand leaflet to assemble the stand.
Inserting batteries into the
remote
1
Remove the protection sheet.
2
Push and slide the cover upward.
6
GB
1
1: Attaching the Table-Top
Stand (except
KDL-65HX920)
Except KDL-60NX720
1
Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2
Place the TV set on the Table-Top Stand.
Guide
pins
~
• Align the TV from the top, slide it in until the joint
stand cannot be seen.
3
Fix the TV to the Table-Top Stand
according to the arrow marks
guide the screw holes using the supplied
screws.
~
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
that