Rom Ver/Sum - Yamaha RX-V363 Service Manual

14. ROM VER/SUM

The firmware version and checksum values are displayed. The signal is processed using EFFECT OFF.
The checksum is obtained by adding the data at every 8 bits for each program area and expressing the result as a 4-
figure hexadecimal data.
14. VER. C015
14.A.SUM:6F75
14.P.SUM:D057
14.SPI.S:A3F0
14.SPD.S:FC4A
FROM TEST:NoEr
DRAM TEST:NoEr
PROM TEST:NoEr
Version
Firmware version of microprocessor (IC101 DSP P.C.B.) is displayed.
All checksum
Checksum value of microprocessor (IC101 DSP P.C.B.) is displayed.
Program checksum
Checksum value of application and standby code program is displayed.
SPI (Serial Peripheral Interface) checksum
Checksum value of SPI firmware update code is displayed.
SPD (S/PDIF) checksum
Checksum value of SPD firmware update code is displayed.
FlashROM test
The read/write test of microprocessor (IC101 DSP P.C.B.) and flash ROM (IC201 DSP P.C.B.).
NoEr: No error detected
SDRAM test
The read/write test of microprocessor (IC101 DSP P.C.B.) and SDRAM (IC202 DSP P.C.B.).
NoEr: No error detected
EEPROM test
The read/write test of microprocessor (IC101 DSP P.C.B.) and EEPROM (IC102 DSP P.C.B.).
NoEr: No error detected
RX-V363/HTR-6130
NG: An error is detected
NG: An error is detected
NG: An error is detected
37