To Add Or Remove Program Time Periods - homexpert THR870CUK User Manual

Operation and Programming

To add or remove program time periods

You can eliminate any unwanted time periods (2 through 6) if you
MON
require fewer than six per day.
21.
°
6:30
AM 0 1 Press the < or > buttons repeatedly to select a time period (or
press the DAY button to select a different day).
SET TIME 1
1 2 3 4 5 6 2 Press and hold the i button for at least two seconds to remove
the selected time period. The temperature will remain at the level
21.
set for the previous time period until the following period begins.
°
12:00
PM
0
To restore a disabled time period, follow the procedure above to
SET TIME 3
select the disabled period, then press and hold the i button for at
1 2 3 4 5 6
least two seconds to restore it.
Press and hold
--.
°
--:--
PM
-
DISABLED
1 2 3 4 5 6
14
Temporary schedule overrides
When idle, the thermostat displays the current room temperature. You
Current temperature
can press the i button at any time to see the "target" temperature the
Thu 30/12/10
thermostat is trying to maintain.
20.
°
12:34
PM
5
Press the p or q buttons to change the temperature temporarily.
Room Temp
In Auto mode, the thermostat will maintain the temperature you
set until the next program time period begins. It will then revert to
AUTO MAN OFF
the level programmed for that time period. To maintain a constant
Desired temperature
temperature for longer periods of time, switch to Manual mode (see
Thu 30/12/10
page 11).
20.
°
12:34
PM
5
TARGET TEMP
NOTE: See also temporary program overrides for holidays, parties or
days when you stay home from work (see pages 16-18).
AUTO MAN OFF
Set to override present time period
Thu 30/12/10
23.
°
12:34
PM
0
TARGET TEMP
AUTO MAN OFF
homexpert by Honeywell THR870CUK Programmable Thermostat
tm
15