Carbon Fiber Forks And Stems - Cannondale Bicycle Owner's Manual

PaRt ii
aPPendiX d
Care and maintenance of Carbon fiber forks & stem
WaRninGs
alWays seek PRofessional seRviCe
Incorrectly installing, adjusting, servicing, or assembling the wrong parts (handlebar stem, compression
assembly, brake bolt, spacers and spacer positions) on your bicycle fork can cause serious damage to
it. Any failure in the fork, headset, handlebar stem, or compression assembly while riding can cause
you to have a serious accident. All adjustments, maintenance, and any changes must be made by your
Cannondale Dealer.
stoP RidinG a damaGed foRk & stem immediately your fork can be seriously damaged in any
crash or impact. Damage can be concealed and requires very carefully inspection by a professional bike
mechanic.
A damaged fork and/or handlebar stem can fail without warning. Go to PART II, Section D. Inspect For
Safety. Read "Understanding Composites" for information on carbon fiber
RePlaCe the foRk With a neW one if the dRoPoUt taBs aRe missinG oR damaGed. The dropout
tabs located at the bottom of the fork dropout act as a secondary wheel retention device and can reduce
the risk of the wheel disengaging from the fork if the quick release is not correctly adjusted and closed. It
is possible for the tabs to become worn out or damaged through repeated wheel installation and removal,
car rack use, etc.
do not modify the foRk in any Way. Do not drill holes or install mechanical clamps.
do not eXCeed the maXimUm staCk heiGht oR loCate sPaCeRs on toP of the stem. MAXIMUM
STACK HEIGHT is a distance spacers may be stacked between the top of the head tube and the bottom of
the stem. Exceeding this distance with spacers or locating spacers on top of the handlebar stem can place
significant stress on the steerer tube. It could break.
For technical information and specifications, see http://www.cannondale.com/tech_center/
yoU Can Be seveRely inJURed, PaRalyzed oR killed in an aCCident if yoU iGnoRe these
WaRninGs.
90