GUIDE (DISC T) ALIGNMENT
Cam
Holder (guide T)
Cam
Guide (disc T)
Fixed screw
(1) Rotate the cam and adjust to the position
shown in the figure.
Guide (disc T)
(2) Check that the state is as shown in the
figure.
Disc
A
Tapering screwdriver
B
Guide (disc T)
Disc
Holder (guide T)
(4)Move the holder (guide T) with a tapering screwdriver, and
Holder
(3)Loosen the fixed screw by about 60 °.
set the position of the guide (disc T) to A:B=1:1.
(guide T)
— 15 —