Table of Contents
Advertisement
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (MFT) function.
After step 5, press V/v to select "MFT". Press B/b to get a clear picture. Then
press ENTER.
Notes
• If the TV sound is distorted or noisy, select the appropriate TV system ("G" or "B") for your
area (see page 20).
• When adjusting MFT, the menu may become difficult to read due to interference from the
picture being received.
Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start...
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select
SET UP
(OPTION) and press ENTER.
ENTER
SET UP
V/v/B/b
ENTER
O RETURN
OPTION
Clock
Install
User Set
Auto Power Off
[Off]
Screen Messages
[On]
V
v
RETURN
SET UP
ENTER
continued
Presetting channels
21
Advertisement
Table of Contents
