Table of Contents
Advertisement
Troubleshooting
guide
If the unit does not operate properly, check all of following
points, as well as connections
and the control positions of all components
connected
to this unit, before requesting
professional
servicing.
This table does not include checks for mistaken connections
or incorrect settings of other
components.
If the problem
is not solved
by this table or is not included
in the problems
listed below, contact
your Technics
dealer for
Problem
Disc compartment
does not open
when the open button
is pressed
during play or in the pause mode.
Disc is inserted
but number
of
tracks and playing
time are not
displayed.
Certain sections
of a disc are
not
played normally.
Causes
*This is not a malfunction.
This is a design
feature which protects the disc.
*The lock shaft is in the out position (1).
-Disc is inserted upside down.
*Disc is dirty.
*Disc is scratched.
*Disc is seriously warped.
0.4 non-standard
disc is inserted.
*Moisture
has formed inside the player.
*The lock shaft is in the out position (1).
l
Disc is dirty.
*Disc is scratched.
Remedy
*When opening the disc compartment,
first
press the stop button to stop disc platter
rotation, then press the open button.
aPress tothe in (unlocked)
position (I-r).
*Insert disc again properly.
*Wipe clean with soft cloth.
*Use a new disc.
-Use a new disc.
*Use only discs with the dm%
mark.
o,o".i."Do
*Wait about 20 to 30 minutes.
*Press to the in (unlocked)
position (1-m).
-Wipe clean with soft cloth.
*Play disc skipping over scratched
sections (if
so desired); otherwise
replace the disc.
No search
performed
when
search dial is turned.
Sound is
strange.
-The dial search button is not "on".
*Press
the dial search switch to "on".
(Dial search indicator (I)
is not illuminated.)
(Dial search indicator(m)
will be illuminated.)
-The pitch control switch is in the "on" position
*Slide the pitch control knob to the center
and the pitch control knob in a position other
position (au).
thanIID.
Intervals
between
tracks
(songs)
*The auto space button is "on".
aPress the auto space button to cancel this
are """*"ally
long.
(The auto space indicator is illuminated.)
function.
Play stops at the beginnng
of
*The auto cue button is "on".
*Press the auto cue button to cancel this
each track.
(The auto cue indicator is illuminated.)
function.
Elapsed
playing
time is not
*Time display mode is set to a different mode.
*Press the correct button for the desired display
shown
inthedispfay.
mode.
Disc is not played
normally.
*The controls were not operated as described
*Switch
power OFF and then operate in
in the instructions.
accordance
to instructions.
Remote control
commands
*No disc is inserted in the holder.
*Insert a disc.
z
are not performed.
*The remote control unit batteries are weak.
*Replace
the batteries.
5
*The remote control unit is being used in an
*Be sure the distance and angle are correct and
0
improper location.
that no obstacles
are blocking the signal path.
2
E
Disc play starts
but the
*Digital
volume attenuation
button on the
2
-Press
the Abutton
on the remote control unit
volume
level is very low.
remote control unit is pressed.
to return to 0 dB.
(The I
indicator is illuminated.)
-27-
Advertisement
Table of Contents
