Table of Contents
Advertisement
Section 14 : Getting Label Print Job Started
1. Getting Label Print Job Started
Load a medium on the P-55 printer. (To do this, refer to Section 13, Loading Print Media.)
1)
Click "Open" in the File menu of the Label Editor
and select and load an image into the P-55.
2)
Click File
Print.
3)
Get "TEAC P-55 Disc Label Printer" shown in the
label editor NAME box and click Properties.
4)
Perform the following for the best possible output
quality:
4)-1 In the Color field select a Method suited to
the image you use.
4)-2 Select a Media model.
(The outer diameter can be defined up to 120mm,
and the inner diameter can be defined up to
50mm. When you have set either or both of these
parameters, you can enter an appropriate name
into the upper left box and click Save, so that you
can choose your settings as a basic setup.)
34
Advertisement
Table of Contents
