Instant Timer Recording - Zenith VRE4122 Installation And Operating Manual

INSTANT TIMER RECORDING

power
eject
menu clear
ch/trk
enter
adj adj
tv / vcr sp / slp
ch/trk
rec / itr
stop pause a
rew play ff
cm skip
EZ review
INSTANT TIMER RECORD
MENU
INSTANT TIMER RECORD
CHANNEL 2
SPEED SP
START NOW
LENGTH 0H30M
0H30M 1H00M 1H30M
0H00M 9H00M 8H30M
Length Display
(each press increases
recording by 30 minutes)
30
Instant Timer Recording allows you to make a recording easily of
a preset length without using the program timer.
PREPARATION
• Turn on the power of both the VCR and the TV.
• Be sure the TV is set to the VCR output channel (3 or 4).
• If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV's source selector to VIDEO.
1
Insert a video cassette with the safety tab in place.
2
Select the desired channel by using CH/TRK (L/M) or
number (0-9).
The channel number appears on the TV screen and indicator panel.
• If you are recording from another source via audio/video input
jacks (at the Rear or Front panel), select the LINE1 or LINE2.
3
Set the TAPE SPEED option to desired speed (SP or SLP)
by pressing SP/SLP.
The tape speed will appear on the TV screen and indicator panel.
4
Press REC/ITR twice.
The menu as illustrated, will appear on the TV screen.
Recording will start (The TIMER indicator will light).
5
Press REC/ITR repeatedly to select the recording time
length.
At the end of recording the display will read 0H00, the VCR will
stop recording and shut off.
• During Instant Timer Recording, changing the channel on the
VCR will not be possible.
• You can stop the recording by pressing STOP.
CHECKING THE RECORDING TIME
Press REC/ITR once to check the recording time. The recalled
setting will automatically return to the TV screen after 6 seconds.
TO EXTEND THE RECORDING TIME
The recording time can be extended anytime by pressing REC/ITR.
Subsequent presses result in advancing the recording time by
30-minute increments.
NOTES
• If you press PAUSE during instant timer recording, the VCR
will enter the normal recording mode.
• If the VCR is set to "0H00M", the VCR goes to normal record-
ing mode.