Drawer Closure Mechanisms - GE PFSS5NJWSS User Manual

• Two self closing freezer drawer cam and lever mechanisms automatically
pull the drawer shut when it is within 1 inch of the closed position. The
closure mechanisms are located on the lower corner areas of the drawer
and cabinet.
• Each closure mechanism consists of a lever, spring, and cam. The lever is
attached with a spring to a hook in the base channel. The cam is mounted
to the bottom of the drawer with two T-20 Torx screws. The lever interacts
with the cam to complete the closing of the drawer.
• A pair of pliers can be used to remove the spring from the hook.
• The spring and lever can then be pulled out through the hole in the base
channel.
mabe CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE.

Drawer Closure Mechanisms

Note: Each door closer cam can be installed
incorrectly. Ensure each cam is installed to the
bottom of the drawer with the hooked end
towards the center of the drawer.
42
January 2008