Detachments; Outdoor Unit - Toshiba RAV-SM2244AT8-E Service Manual

14-1. Outdoor Unit

RAV-SM224, RAV-SM280 series
No. Part name
Common
1
procedure
Stop operation of the air conditioner and turn off
breaker switch.
Ensure wearing of gloves when performing any work
in order to avoid injury from parts, etc.
1. Detachment
1) Remove the service panel.
2) Remove the power supply cable and the indoor/
3) Remove the top plate.
2. Attachment
1) Attach the top plate.
2) Connect the power supply cable and the indoor/
The power supply cable and the indoor/outdoor
connecting wire must be affixed along the crossover
pipe using a commercially available bundling band so
that they do not make contact with the compressor,
gas valve, gas pipe and discharge pipe.
3) Attach the front panel.
Discharge 1. Detachment
2
port cabinet
1) Carry out the operation in 1. of
(upper)
2) Remove screws for the discharge port cabinet and
3) Remove screws for the discharge port cabinet and
4) Remove screw for the discharge cabinet and heat
5) Remove screw for the discharge port cabinet and
2. Attachment
1) Place upper left side of discharge cabinet on
2) Mount other removed screws into original positions.

14. DETACHMENTS

Procedure
WARNING
CAUTION
(Hexagonal screws Ø4 × 10, 3 pcs.)
• Remove the screws and then pull service panel
downward to remove.
outdoor connecting wire from the cord clamp and
the terminal.
(Hexagonal screws Ø4 × 10, 6 pcs.)
(Hexagonal screws Ø4 × 10, 6 pcs.)
outdoor connecting wire to the terminal and then
fix with the cord clamp.
CAUTION
(Hexagonal screws Ø4 ×10, 3 pcs.)
the inverter assembly. (ST1T Ø4 × 8, 2 pcs.)
the discharge cabinet.
(Hexagonal screw Ø4 × 10, 2 pcs.)
exchanger. (ST1T Ø4 × 8, 1 pc.)
the fin guard. (Hexagonal screw Ø4 × 10, 1 pc.)
upper side of end board of heat exchanger and fix
with a screw. (ST1T Ø4 × 8, 1 pc.)
Q
above.
– 112 –
Remarks
Service panel
Top plate
Setting moment
Upper end plate
of heat exchanger
Discharge port
cabinet (upper)
Discharge
port cabine
Heat exchanger
g
b