InFocus SP5700 User Manual page 25

Presets: This allows you to customize settings and save the settings to be
restored later. To restore the factory default settings, choose Factory Reset in
Presets
the Settings>Service menu.
To set a preset for the current source, adjust the image, select Save Settings
Save User Presets
in the Presets menu, then choose Save User 1, 2, or 3. You can recall these
settings in the future by selecting the appropriate user presets.
Gamma: Gamma tables contain preset intensity configurations optimized
for the input source. You can select a gamma table that has been specifically
tuned for either film, video, Bright Room, or PC input. (Film input is mate-
rial originally captured on a film camera, like a movie; video input is mate-
rial originally captured on a video camera, like a TV show or sporting
event.) White Peaking increases the brightness of whites that are near 100%.
NOTE: Your viewing preferences may vary. Cycle through the gamma
options and pick the one you like the best.
Gamma
Overscan: lets you crop the input or zoom the input if desired.
Overscan
24