Connecting A Desktop Computer - InFocus LP755 User Manual

S e t t i n g
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use Mac adaptors
(ordered separately). See
"Optional Accessories" on
page 52.
NOTE: The projector must be
turned on to display the image on
your monitor.
10
u p t h e

Connecting a Desktop Computer

1 Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
2 Plug the
connector on your computer.
F 8
IGURE
Connecting the CableWizard cable to a desktop computer
Do you want to display the image on your computer's monitor as well
as on the projection screen?
1 Plug your monitor's cable into the
CableWizard.
Do you want to play your computer's audio on the projector?
1 Unplug the audio cable, if present, from your computer.
2 Plug either end of the CableWizard audio cable into the audio
connector on your computer.
3 Plug the other end of the audio cable into the
on the CableWizard.
P r o j e c t
end of the CableWizard cable into the monitor
o r
connector on the
connector