Table of Contents
Advertisement
Squelch Control: This control allows the user to squelch (reject)
minor noise or interference that might exist on a channel in your area.
This control is factory set for average conditions. If the
control is fully advanced, short range or excessive
drop-outs can occur.
Headphone "PHONES" Level Control: This control allows the user
to adjust the volume or output level of the monitoring headset audio.
The control is factory set for typical headset output level.
If the ENG-1 Receiver is powered by external batteries
that are also common with other auxilliary equipment,
connecting the phones jack to the auxilliary jack can
cause damage to the ENG-1 Receiver.
Headphone "PHONES" Jack: 3.5mm O.D. Male, Mono Jack.
Telex reccommends that a 32 to 600 ohm headset be
used.
Low Battery Indicator: A yellow LED flashes when power is applied
to indicate a good battery. Lights when the battery is low.
TX ON Indicator: A green LED displays when the ENG-1 is
receiving a transmitted signal.
CAUTION
CAUTION
NOTE
-6-
Advertisement
Table of Contents
