Ryobi RBL30MVA Operator's Manual page 9

to stARt A WARM eNGINe (Fig. 6):
n Move ignition switch () to " I " run position.
n Make sure cruise control () is locked in idle position.
Do not engage the throttle trigger () or cruise control
during the start-up process.
n Rotate the choke dial counterclockwise to the RUN
position.
n Slowly press the primer bulb 7 times.
n Pull the starter grip sharply until the engine runs.
to stop the eNGINe:
n Move ignition switch () to " O " stop position.
opeRAtIoN
9
x7
Fig.