Teac P-55 Instruction Manual page 38

SECTION 17: Getting Label Print Job Started
7)
Enter the number of copies you want to print into the Number of copies box.
8)
Enter the outside and inside diameters into the Outside and Inside diameter boxes to define the print area.
(The outside diameter defaults to 120mm and the inside diameter to 21mm.)
9)
Click OK and the printing process starts.
The operation state (*Note) is displayed on the P-55 LCD during a print operation. The tray is ejected as
the print operation is completed.
(*Note: See Indicating Operation State of SECTION 12: Control Panel Features .)
*To print on multiple media, take out the medium from the tray, load another medium and click OK .
8)
9)
38
7)