Intended Use; Maintenance; Special Safety Rules - Ryobi RID1801 Original Instructions Manual

are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits
etc, in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fi re when
used with another battery pack.
b. Use power tools
designated battery packs. Use of any other
battery packs may create a risk of injury and fi re.
c. When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fi re.
d. Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
6. SERVICE
a. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

SPECIAL SAFETY RULES

■ Wear ear protectors. Exposure to noise can cause
hearing loss.
■
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
■
Make sure that the tool is only connected to the
voltage marked on the name plate.
■
Never use the tool if its cover or any bolts are
missing. If the cover or bolts have been removed,
replace them prior to use. Maintain all parts in good
working order.
■
Always secure tools when working in elevated
positions.
■
Never touch the blade, drill bit, grinding wheel or
other moving parts during use.
■
Never start a tool when its rotating component is in
contact with the work piece.
2
only with specifically
■
Never lay a tool down before its moving parts have
come to a complete stop.
■
The use of accessories or attachments other than
those recommended in this manual might present
a hazard.
■
When servicing use only identical replacement
parts.

INTENDED USE

You may use this product for fastening / removing screws
and bolts.
CAUTION
The impact driver is not designed to be used as a drill.

MAINTENANCE

■ When servicing, use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■ Always wear safety goggles or safety glasses with side
shields during power product operation or when blowing
dust. If operation is dusty, also wear a dust mask.
■ To avoid serious personal injury, always remove
the battery pack from the product when cleaning or
performing any maintenance.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging
environmental-friendly recycling.
SYMBOL
Safety alert
V Volts
Revolutions per minute
Direct current
Please read the instructions carefully
before starting the machine.
Safety
should be sorted for