Ser Vice Journal; Pre-Deliv Ery Service; After The First 8 Hours - McCulloch M105-97F Operator's Manual

Pre-deliver y service
1 Charge the battery for 4 hours at max. 3 amp.
2 Attach the cutting unit to the machine, see Attaching the cutting unit.
3 Fit steering wheel, seat and any optional equipment. See instructions under the heading Assembly.
4 Check and adjust tyre pressure. See instructions under the heading Technical data.
5 Check that the right amount of oil is in the engine. See instructions under the heading Technical data.
6 Connect battery. See instructions under the heading Assembly.
7 Fill with fuel and start engine.
8 Check that machine does not move in neutral.
9 Check:
Forward drive. Also see under the Drive system section.
Reverse drive. Also see under the Drive system section.
Operation of blades.
Seat safety switch. See the "Checking the safety system" section.
Safety switch for parking brake. See the "Checking the safety system" section.
After the fi rst 8 hours
1 Change engine oil See the "Engine oil change" section.
4 –
English

Ser vice journal