Advertisement
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channell.
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to "PCM".
Stream :
Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
[Q]I
Settings for DTS (Default: ON)
Select a setting using
[.A. / T],
then press [ENTER].
[£]
Settings for Dolby Digital (Default: Stream)
Use
[.A. / T]
to select a setting, then press [ENTER].
Audio Out
fit
ON
0 '
Choose the appropriate audio setting for your external device.
It
will
only affect a disc playback.
Use
[.A. / ... ]
to select a desired item, then press [ENTER].
[KJI
Dynamic Range Control (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
Use
[.A. / ... ]
to select a setting, then press [ENTER].
Your setting is activated.
ON
: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON".
OFF
: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF".
Your setting will be activated.
1
~~~~amlc====n~Yon
. '
the discs which are recorded in the Dolby Digital
format.
_an
•
'
lID
1 Settings for PCM (Default: 48kHz)
Use
[.A. / ... ]
to select a setting, then press [ENTER].
IJII
ON
I
Your setting will be activated.
48kHz
: If your amplifier/decoder is NOT compatible
with 96kHz PCM, select "48kHz". 96kHz sound
will be output in 48kHz.
96kHz
: If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
~
e"._Bt
Note
, When playing back disc with copyright protection
• Even if you select "96kHz", the sound will be down
sampled at48kHz.
F
90
EN
Advertisement
