Kenwood DPF-1010 Service Manual page 6

DPF-1010/1010E/2010/2010E
CD section
Since this CD system incorporates the following automatic
adjustment function, when the pickup is replaced, it is not neces-
sary to readjust it
Since this CD unit does not need adjustment, the combination
of PWB and laser pickup unit is not restricted.
•Automatic adjustment item
1. Focus offset(Fig.1)
2. Tracking offset(Fig.2)
3. E/F balance (Tracking error balance) (Fig.3)
4. RF level AGC function (HF level : constant)
5. RF level automatic follow-up of the tracking gain
This automatic adjustment is performed each time a disc is
changed. Therefore, each disc is played back using the optimal
settings
6
ADJUSTMENT
Fig.4 Checking points