Cool Mode - Carrier Elite Plasma Green 53QHET12-708J Owner's Manual

USE OF REMOTE CONTROL (Cont.)

COOL MODE

START
1.
Press MODE button to select COOL mode
on the remote control display.
2.
Press TEMP buttons
set temperature on the remote control display.
Set desired temp. between 17°C and 30°C.
3.
Press FAN SPEED button to select
the desired fan speed on the remote
control display.
4.
Press ON/OFF button to start
the air conditioner.
ON symbol
remote control display.
OPERATION led will illuminate
on the display panel of indoor unit.
COOL mode starts after approximately 3 minutes
and Plasma operates for refeshing air, removing
smoke and dust particles. Plasma gives an
immediate sensation of energy and well-being.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
• If the room temperature is higher than
the selected temperature, the system will start COOL mode.
• If the room temperature is equal to or less than
the selected temperature, the system will stop COOL mode.
• If you use AUTO fan speed with COOL mode, the fan speed
changes automatically to low or medium or high speed
based on the temperature difference between setting
temperature and room temperature.
or to select the
appears on the
1
4
3
( 9 )
2
2