Disassembly; Removing And Replacing The Battery Cover And Battery - Motorola MOTOKRZR K1m Service Manual

Cdma 1900 mhz, cdma 800 mhz wireless telephone

Hide thumbs Also See for MOTOKRZR K1m:

Table of Contents

Disassembly

The procedures in this section provide instructions for the disassembly of K1m

telephones. Tools and equipment used for the phone are listed in Table 1, preceding.

Many of the integrated devices used in this equipment are vulnerable to damage

from electrostatic discharge (ESD). Ensure adequate static protection is in place

when handling, shipping, and servicing the internal components of this equipment.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

All batteries can cause property damage and/or bodily injury, such as burns if a

conductive material, such as jewelry, keys, or beaded chains touch exposed termi-

nals. The conductive material may complete an electrical circuit (short circuit) and

become quite hot. Exercise care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

Ensure the phone is turned off.

Press in and hold the battery door latch as shown in Figure 1.

Figure 1. Removing the Battery Cover

Rotate the battery cover upward and lift it completely off the phone.

March 09, 2007

MOTOKRZR K1m

061188a

6809504A60-A

Table of Contents