Screen Setup; Custom Setup - Coby DVD-218 User Manual

SETUP MENU (Press SETUP button)
SCREEN MENU
In STOP mode, press SETUP button
highlight SCREEN SETUP.
Press UP/DOWN button
the desired item in the SCREEN menu.
Press to confirm the selection.
ENTER

Screen Setup

Screen Setup
B
A
C
TV Type
TV System
Video Output
Brightness
Contrast
Use to select
Adjust TV screen viewable format
TV TYPE
Default setting
TV SYSTEM
Default setting
VIDEO OUT
Default setting
BRIGHTNESS
Default setting
CONTRAST
Default setting
E
1. Certain DVD disc are formatted in wide screen (16:9) or letter
box (4:3)only. Adjusting the setting of the disc player will not alter
the screen size for these Format-only discs.
2. The PSCAN button on the remote should only be used if you
have a Component Video Connection.
3. If your TV does not have a Y, Cb, Cr Component function, please
do not change Video Out setting .
SETUP
to highlight
4:3 PS (Pan Scan)
4:3 LB (Letter Box)
16:9 (Wide Screen)
4:3 PS
NTSC
PAL
AUTO
NTSC
CVBS+S-Video
CVBS+ YUV
Y U V P-Scan
CVBS+S-Video
NORMAL
BRIGHT
SOFT
NORMAL
-4
-3
-2
-1
0
1
2
3
4
0

CUSTOM SETUP

After entering the main menu, choose and confirm
CUSTOM setup and then the following window
will appear on the TV screen.
Custom Setup
A B
C
Parental Ctrl
Password
Angle Mark
Default
Use
A) Parental Control
There are 8 levels of Parental Control,as follows:
1.G; 2.;3.PG;4.PG13;5.;6.R;7.NC17;8.;
Level one opens discs to people of all ages. Level
eight is suitable only for adults.
If you want to change the Parental Control setting,
enter the level number and then the four digit pass code.
The default code is 8888.(If you are using the player for the
first time, there is the code that is needed.)
When the input code has been confirmed, the level setting
menu will appear.Move the cursor to the appropriate level
and press ENTER to confirm. Press Set Up to exit the Menu.
B) Password
Move the cursor to the PASSWORD prompt and press ENTER.
Input the password 8888 if this is your first use.
After confirmation, you will be required to input a new 4 digit
pass code.After entering your new pass code, press ENTER
to confirm.
WARNING: Please keep a copy of the new pass code
in a safe place, Otherwise you will not be able to change
the Parental Control.Please remember your PASSWORD,
as the DEFAULT setting will revert everything BUT the
PASSWORD to the factory defaults.
C) ANGLE MARK You can choose to have the
ANGLE MARK function ON or OFF . In the ON mode,
an ICON will display on the screen when a disc has
multiple angle shots available for viewing. Press ANGLE
on the remote to enjoy these scenes.
D) DEFAULT This function allows you to change the
player back to the factory default settings. All settings will
be changed back to the original settings. If you have
changed the default PASSWORD of 8888,this will not revert.
17
4: PG13
5
6: R
7: NC17
8
to select