Storage Features - Kenmore 253.7031 Series Use & Care Manual

Storage Features

CAUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change. Allow the glass shelves to stabilize
to room temperature before cleaning. Do not wash in
dishwasher.
NOTE
Features may vary according to model.
Your refrigerator includes Spill-Proof
designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh food
compartments to suit your needs. The shelves have mounting
brackets that attach to slotted supports at the rear of each
compartment.
To Change the Position of a Shelf:
1. Remove all food from shelf.
2. Lift the front edge up and pull the shelf out.
3. Replace by inserting the mounting bracket hooks into the
desired support slots.
4. Lower the shelf and lock into position.
Shelf features
Full Spill-Proof
Half Spill-Proof
TM glass shelves that are
TM Shelf
TM Shelf
Drawers
Your refrigerator includes a variety of storage drawers. These
drawers are located in fixed positions at the bottom of the
fresh food compartment.
Crispers
Crisper drawers are designed for storing fruits, vegetables,
and other fresh produce.
Opening Crisper Drawer
Crisper Humidity Control
Crisper drawers include a sliding control for adjusting the
humidity inside the crisper. Leafy vegetables keep best when
stored with the Humidity Control set on Higher Humidity. Fresh
fruits keep best when stored with the Humidity Control set on
Lower Humidity.
Adjusting Crisper Humidity
To Remove the Crisper Drawer for Cleaning:
1. Pull the drawer out until it stops.
2. Lift the front slightly and remove the drawer.
Removing Crisper Drawer
19