Symbols - Craftsman 138.37097 Operator's Manual

Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
Alternating Current
Direct Current
n o No Load Speed
Class II Construction
/min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Ricochet
Sharp Blade
Operating on a slope
Keep Bystanders Away
Electric Shock

SYMBOLS

DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc.,
per minute
Do not expose to rain or use in damp locations
To reduce the risk of injury user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Thrown objects can ricochet and result in personal
injury or property damage.
Danger – Keep hands and feet away from blade.
Do not mow a slope that has an angle of greater
than 15°.
Keep all bystanders at least 50 ft. away.
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
6 — English