Troubleshooting; If Your Phone Stops Responding; Restore Original Settings; What To Do When The Memory Is Full - Vertu Constellation User Manual

Troubleshooting

If your phone stops responding

Press and hold down the power key for about 8 seconds, until the phone vibrates and
switches off.
Switch the phone back on if necessary.
No content, such as contacts or messages, is deleted.

Restore original settings

If your phone is not working properly, you can reset some settings to their original
values.
1 End all active calls and connections.
2 Select Menu > Settings and Phone > Phone management > Factory
settings > Restore.
3 Enter the lock code.
This does not affect documents or files stored on your phone.
After restoring the original settings, the phone switches off, and then on again. This
may take longer than usual.

What to do when the memory is full?

If either of the following messages is displayed when you are deleting several items at
the same time, delete items one by one, beginning with the smallest items:
• Not enough memory to perform operation. Delete some data first.
• Memory low. Delete some data from phone memory.
Copy content you want to keep to the mass memory or to a compatible computer. If
possible, install applications to the mass memory, rather than the phone memory.

Message indicator blinking

Q: Why is the message indicator
A: The maximum number of messages are stored on your device. Delete some
messages. The number of messages that can be stored on the SIM card is
considerably lower than the number that can be stored in the device memory. You can
use Nokia Ovi Suite to save messages to a compatible computer.
blinking in the home screen?
© 2011 Vertu. All rights reserved.
Troubleshooting 127