Specifications; Ezw-Rt - Sony WAHT-SA1 Operating Instructions Manual

• Move away the other components from the
surround amplifier or turn off the other
components.
Operation
The system does not work normally.
• Disconnect the AC power cord (mains lead)
from the wall outlet (mains), then reconnect
after several minutes.

Specifications

TA-SA100WR
(Surround amplifier)
Amplifier section
Stereo mode (rated)
Surround mode (reference) RMS output power
* Depending on the source, there may be no
sound output.
Rated impedance:
General
Power requirements:
Power consumption
Dimensions (approx.)
Mass (approx.)

EZW-RT10

Communication System
Output
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
80 W + 80 W (at 3
ohms, 1kHz, 1%
THD)
: 143 W
(per channel at 3
ohms, 1 kHz, 10 %
THD)
3 - 16 Ω
220 V – 240 V AC,
50/60 Hz
On: 50 W
85 mm × 100 mm ×
330 mm (w/h/d)
(incl. EZW-RT10)
85 mm × 100 mm ×
345 mm (w/h/d)
incl. speaker cord
cover and speaker
cord holder
1.7 kg incl. speaker
cord cover and
speaker cord
holder
S-AIR
Specification
version 1.0
12.0 mW
2.4000 GHz -
2.4835 GHz
DSSS
DC 3.3 V, 350 mA
50 mm × 13 mm ×
60 mm (w/h/d)
13
GB