Operation Of Remote Controller - Marantz SR4023 User Manual

ENGLISH
CAljJJQN N..BA,lIERIES
Use "AAA" type batteries in this remote controller.
We recommend that you use alkali batteries.
If the remote controller does not operate from
close to the unit, replace the batteries with new
ones, even if less then a year has passed.
The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
When inserting the batteries, be careful to do so in
the proper direction, following the
+
and - marks in
the remote controller's battery compartment.
• To prevent damage or battery fluid leakage:
Do not use a new battery with an old one.
Do not use two different types of batteries.
Do not short-circuit, disassemble, heat or
dispose of batteries in flames.
Remove the batteries when not planning to use the
remote controller for a long period of time.
If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country
or area.
1.
Remove the battery cover.
3.
Close the battery cover until it clicks shut.
2.
Load the two new size "AM" batteries inside
the battery compartment while taking care to
align their polarities correctly with the polarity
markings (8:) with (8:) and
8
with
8).
~8:)
8:)~ ~
Before using the remote controller for the first time,
load the batteries in the remote controller. The
batteries provided are used to verify the operations
of the remote controller only.
OPERATION OF REMOTE CONTROLLER
REMQJ~.QONJB9~
Operate the remote controller within a distance of
approx. 5m from the infrared receptor window on the
front of the unit.
Caution:
• Do not allow direct sunlight, an inverter fluorescent
light or other strong source of light to shine onto
the player's infrared receptor window. Otherwise,
the operation of the remote controller may be
disabled.
Bear in mind that operating the remote controller
may cause other devices operated by infrared rays
to be operated by mistake.
The remote controller cannot be operated if the
space between the controller and the player's
infrared receptor window is obstructed.
Do not place any objects on top of the remote
controller.
Doing so may cause one or more buttons to be
held down which will cause the batteries to run
down.
3