Turning off the computer
It is a good idea to power off your computer when you are not
using it for a while.
If you are using the computer for the first time, leave the
computer plugged into a power source (even though the
computer is off) to fully charge the battery. When the battery
light glows green, the battery is fully charged.
Guidelines for powering off the computer:
❖
If you have work in progress and you are not connected
to a network, use the Hibernate command to save your
system settings to the hard disk so that when you turn on
the computer again, you automatically return to where
you left off.
❖
To leave the computer off for a longer period, power
down the computer. The Windows
operating system uses the Shut down command to power
down the computer if you are connected to a Windows
network server (domain server) or the Turn Off command
if you are not connected.
TECHNICAL NOTE: You can also use the Cross-Functional
button/Cross Menu utility to toggle between display
resolutions. Press and hold the Cross-Functional button for 3
seconds, and then move over to the display icon. Press the
Cross-Functional button to make your selection.
You cannot rotate the display to any of the portrait modes if the
resolution is set to 800 x 600. You can change from primary
landscape to secondary landscape mode or visa versa using
the Cross Menu program.
Getting Started
Turning off the computer
®
XP Tablet PC Edition
73
®