System expansions
►
Remove the screw (1) and then remove the USB or USB-audio interface (2).
►
Slide the floppy disk drive into the slide-in module (1).
►
Fasten the floppy disk drive with the screws (2) on both sides of the drive.
►
Fit the data and power supply connectors to the floppy disk drive.
►
Remove the ports frame for the USB or USB audio ports from the front panel.
►
Insert the blanking plate for the USB or USB audio ports into the front panel.
►
Attach the front panel (see "Attaching the front panel").
►
Close the casing (see "Closing the casing" chapter).
54
2
1
1
2
A26361-K680-Z101-1-7419