Installing An Additional Serial Port - Fujitsu Siemens Computers SCENIC T Operating Manual

System expansions

Installing an additional serial port

There are two ways of installing an additional serial port:
1. An additional serial interface can be installed in a rear slot cover plate like a board. The
condition is that the system board has a free internal serial port.
Ê
Connect the cable of the additional serial port to the connector on the system board.
Ê
2. An installation opening for the serial port is provided on the rear panel of the casing. As a
result, no board slot is occupied when a second serial port is installed.
Ê
Insert a screwdriver into the opening and break out the pre-stamped installation opening
by moving it backwards and forwards.
38
Installing an additional serial port
A26361-K657-Z101-4-7619