Connecting External Devices To The Usb Ports - Fujitsu Siemens Computers SCENIC T Operating Manual

Preparing for use

Connecting external devices to the USB ports

You can connect a wide range of external devices to the USB port (e.g. a printer, a scanner or a
modem).
USB devices are hot-pluggable. This allows cables from USB devices to be connected
i
and disconnected with the system switched on.
Additional information can be found in the documentation for the USB devices.
Ê
Connect the data cable to the external device.
Ê
Connect the data cable to the USB port
Device drivers
i
The devices you connect to the USB ports usually require no driver of their own, as the
required software is already included in the operating system. However, if the USB device
requires its own software, please install it from the data carrier provided with the USB
device.
18
Connecting external devices
.
A26361-K657-Z101-4-7619