Download Print this page
Leupold RXB-IV Operating Instructions Manual
Leupold RXB-IV Operating Instructions Manual

Leupold RXB-IV Operating Instructions Manual

Digital laser range finding binoculars

Advertisement

Quick Links

RXB-IV
Digital Laser
Range Finding
Binoculars
OPERATING INSTRUCTIONS

Advertisement

loading

Summary of Contents for Leupold RXB-IV

  • Page 1 RXB-IV ™ Digital Laser Range Finding Binoculars OPERATING INSTRUCTIONS...
  • Page 2: Safety And Operation Precautions

    THIS MANUAL WAS WRITTEN IN ORDER TO PROVIDE YOU WITH ALL THE INFORMATION NEEDED TO PROPERLY OPERATE AND OBTAIN YEARS OF BENEFICIAL USE FROM THE RXB-IV. KEEP IT IN A SAFE PLACE AND REFER TO IT AS NEEDED.
  • Page 3 RXB-IV SETTING THE FOCUS MEASURING DISTANCE WITH THE RXB-IV The RXB-IV uses an independent focus design; therefore each eyepiece MEASUREMENT OF DISTANCE WITH THE RXB-IV IS A VERY SIMPLE OPERATION: is focused independently of the other. To set the focus for the unit: 1.
  • Page 4: Operation

    (1/2 minute of angle) of error in aiming out to 500 yards (457 meters). and BAS outputs the equivalent range to The cartridge table shows a common assortment of factory loads use with Leupold’s Ballistics Aiming System ™ reticles or equivalent organized in their TBR performance groups.
  • Page 5 Web sites provided by your cartridge manufacturer. You may also visit the Leupold Web site at www.leupold.com for more assistance in selecting your group. If you have your ballistics performance data, select your performance group from the table on the next page based on the bullet path at 500 yards (457 meters).
  • Page 6 Selecting the BOW mode —Indicates distance measured in yards automatically deactivates the rifle mode. The RXB-IV can be used to measure distances in yards or meters. The displayed range incorporates three The unit of measurement indicator is located near the lower right different ballistics groups (Group A, B, or portion of the OLED.
  • Page 7: Troubleshooting

    CLEANING THE LENSES: Do not leave the RXB-IV in a vehicle on a hot or sunny day, or near When removing dust on the lens surface, use a soft oil-free brush. heat-generating equipment, as this may damage or negatively affect it.
  • Page 8 Leupold & Stevens, Inc. reserves all other rights. ALUMINA; AMERICA’S OPTICS AUTHORITY; CQ/T; DESIGN ONLY (GOLDEN RING); DUPLEX; GOLDEN RING; INDEX MATCHED LENS SYSTEM; KATMAI; LEUPOLD; LPS; LR/T; MADE RIGHT, MADE HERE; MARK 4; MR/T; MULTICOAT 4; PERFORMANCE STARTS ON THE INSIDE; RAINCOTE; RIFLEMAN; SCOPESMITH; VARI-X; VX; and ZERO POINT are registered trademarks of Leupold & Stevens, Inc., Beaverton, Oregon.

This manual is also suitable for:

Green ring rxb-iv