Troubleshooting - Panasonic CF-P1 Supplementary Instructions Manual

Supplementary Instructions

Troubleshooting

Scanning is not possible.
It is impossible to scan a
barcode even if the trigger
button is pressed.
4
Confirm that the barcode is readable (without damage,
etc.)
Confirm the range for scanning
Be sure the scanner is programmed to read the type of
barcode you are scanning.
The distance from the scanner to the barcode is impor-
tant. As a rule of thumb, a farther distance should be
used for a larger symbol to allow the raster pattern to
cover the symbol. In addition, a closer distance should
be used for a thinner symbol.
If the laser beam is not emitted even after the button is
pressed, confirm the remaining battery level.
Confirm that the trigger button is active on the [But-
tons] tab under [Barcode Scanner] on the [System] tab.