Setting Timer Program; Recording Tv Programs Using The Vcr Plus; System - LiteOn LVC-9016G User Manual

Timer Recording
12. Press [ ] [ ] to select the
[ENTER] to exit the Timer-Record menu.
If you wish to delete a timer program on the list, press [ ] [ ] [ ]
[ ] to move to the icon and press [ENTER]. The item is
deleted.
13. Press [POWER] to turn off the unit and activate the
timer record function.
Note:
1. Make sure that a recordable disc or a VHS tape is inserted or
loaded for recording before the scheduled session starts.
2. Check the "Status" column to see the recording failure analysis:
OK The timer program is set and ready to be recorded.
Error There is a problem with the timer program settings.
Change the settings until the status is "OK."
Done The timer program is recorded successfully.
Fail The unit is unable to record the preset timer program.
Move the cursor to the "Status" column to view the cause
of error ("No Disc," "Media Defect," "Disc Full," and etc.).
icon and press
22

Recording TV Programs Using the VCR Plus+

System

1. Press [ POWER] to turn on the unit.
2. Make sure that a recordable disc or a VHS tape
is inserted or loaded for recording.
When you insert a new recordable disc for recording, the recorder
will automatically start the disc preparation process.
3. Press [TIMER] to display the Timer-Record menu.
4. Press [ ][ ] to select one of the timer setting
list and press [ ].
5. Press [ ] [ ] to move to the disc/tape icon and
press [ENTER] to select to record on a disc or a
tape.
6. Press [ ] [ ] to select "Mode" and press [ENTER] .
Press [ ] [ ] to select among "Once," "Weekly" or "Daily" and
press [ ] to select "PlusCode#" to press [ENTER].
Mode: Once <-> Weekly <-> Daily
The bar to enter the PlusCode number is displayed.
7. Press the number buttons (0~9) to enter the
PlusCode number and press [ENTER].
®