Channel Editor - LiteOn LVC-9016G User Manual

Channel Editor

Before using 'Channel Editor' menu
Make sure that the antenna cables are securely connected to
the unit.
Adding or Deleting TV Channels
1. Turn on the TV set and the unit.
2. Switch your TV's input source to "AV."
3. Press [SOURCE] to switch to "TV."
4. Press [EDIT] to bring up the "Channel Editor" menu.
Press [ ] [ ] to select one of the TV channels and
press [ENTER].
Move the cursor to the TV channel to make selection and press
[ENTER] again to cancel the "Delete" operation.
5. Repeat as necessary.
6. When completed, press [ ] [ ][ ] [ ] to select
"EXIT." Press [ENTER] to save the setting and exit
the "Channel Editor" menu.
Moving up/down TV Channels
1. On the "Channel Editor" menu, press [ ] [ ] to
select one of the TV channels and press [ ].
2. Press [ ] [ ] to select "Move Up" or "Move
Down" and press [ENTER].
The channel moves up or down the list.
Each time you press [ ] [ ] and the item changes as follows.
3. Repeat as necessary.
4. When completed, press [ ] [ ][ ] [ ] to select
"EXIT." Press [ENTER] to save the setting and exit
the "Channel Editor" menu.
Renaming TV Channels
1. On the "Channel Editor" menu, press [ ] [ ] to
select one of the TV channels and press [ ].
2. Press [ ] [ ] to select "Rename" and press
[ENTER].
The keypad for entering a title name appears.
3. Select the desired characters from the keypad. Press
[ENTER] after each entry.
4. When completed, press [ ] [ ][ ] [ ] to select
"EXIT." Press [ENTER] to save the setting and exit
the "Channel Editor" menu.
Note:
You only can enter up to 5 characters for a name.
Inserting New TV channels
1. On the "Channel Editor" menu, press [ ] [ ] to
select one of the TV channels and press [ ].
2. Press [ ] [ ] to select "Insert To" and press
[ENTER].
3. Press [ ] [ ][ ] [ ] to enter the channel number
and press [ENTER].
The channel moves to the new position.
4. Repeat as necessary.
5. When completed, press [ ] [ ][ ] [ ] to select
"EXIT." Press [ENTER] to save the setting and exit
the "Channel Editor" menu.
14