Hoover SteamVac Widepath User Manual page 5

Press cord into cord clip on back of
handle. Pull cord tight and wrap cord
around hooks (A2).
Slide crevice tool (G) into holder (some
models only).
Position stair/upholstery nozzle in holder
at base of cleaner and snap it into place
as shown at arrow.
To remove powered hand tool (H), pull it
down and outward.
To reposition the tool, reverse this proce-
dure.
To remove the scrub module (I), grasp it
at the sides and pull it forward.
To reposition module, fit tabs in the stor-
Push module to snap it securely into
position.
Store hose on holder by first positioning
hose in front section of holder.
Position hose on hose hook (Al).
insert end of bare floor attachment into
holder and snap into clip as shown.
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
holes on sides of tool storage area.
While stretching hose, continue wrap-
ping it as shown. Snap end of hose con-
nector (F) into holder.
If hose connector does not reach holder,
stretch hose more thoughout the
wrapped part.
The powered hand tool is shipped in a
plastic bag for protection. Remove the
bag before using the tool by first open-
ing tool door.
5